
dyson airblade wash&dry WD04 Short
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
dyson airblade wash&dry
WD04 Short
TECHNICAL SPECIFICATION
Basin specification
The Dyson Airblade Wash+Dry hand dryer is compatible with most
basin types. Ensure plugs are not installed in the basins and avoid
inserts with embedded plugs (e.g. ones that swivel or elevate).
Using a specially designed test method, Dyson engineers evaluated
the user experience of a wide range of basin types when used with
the Dyson Airblade Wash+Dry hand dryer. For further details on our
recommended basins, please see the guide on our website dyson.com/docs
We recommend avoiding basins with the following geometric characteristics;
Flat bases immediately surrounding the drain hole.
(nominally within a 60 mm radius).
Sloping back and front wall transitions in relation to the base of the basin.
See our pre-installation guide for further details: dyson.com/docs
Basin dimensions:
All basin measurements are internal unless stated otherwise.
Minimum width of basin: 350 mm, Front to back-Minimum: 300 mm
Minimum depth of basin: 100 mm
Basin materials: Basins with highly polished surfoces should be avoided,
e.g. reflective chrome. Porcelain or brushed metal is ideal. When multiple taps
are installed side-by-side, tap centres should be a minimum
of 580 mm apart.
Standard warranty
5 year parts, 5 year labour.
Electrical
Input voltage/Frequency: 200-240V 50-60Hz
Motor specification: 1 000W digital brush less motor
Operating temperature range: 0°-40° C, 32°- 104°F
Heater type: None
Standby power consumption: Less than 0.5 W
Construction
Tap construction: Stainless steel (brushed)
Under counter motor assembly construction: Moulded ABS (main unit)
Exterior screw type: Torx Tl 5
Water ingress protection to IP35
Filter
HEPA filter (glass fibre and fleece prelayer)
Captures 99.95% of particles the size of
bacteria (0.1 microns) from the washroom air1
Operation
Touch-free infra-red activation
Hand dry time measurement: 14 seconds2
Operation lock-out period: 30 seconds
Airspeed at apertures: 341 mph/549 km/h
Maximum altitude: 2,000 metres / 6,562 ft.
Water operation
Water flow rate: 1.9 I/min normal fitted aerator.
4 I/min with low flow aerator supplied with product.
Water temperature control: Thermostatic mixer recommended (not supplied)
Water pressure required: 1-8 bar
Equipped with automatic duty flush -
every 24 hours for 60 seconds after the last use.
Logistics
Net weight: WD04 4.26 kg; WD06 9.51 kg
Packaged weight: WD04 6.76 kg; WD06 13.65 kg
Packaged dimensions: WD04 H303 X W284 X D291 mm
WD06 H610 x W375 x D302 mm
FLOOR
Tap dimensions
WD04 Height 159 mm Width 303 mm Depth 286 mm
Motor bucket dimensions
WD04 Height 266 mm Width 142 mm Depth 189 mm
Minimum clearance
Z 100 mm clearance fram floor
Warranty conditions
- The company guarantees the product for a period of 5 year from the date of purchase or delivery date.
- The product warranty covers only product problems caused by manufacturing.
- Product repair service center
Sangchai Air Quality Co., Ltd.
No. 88 Building B, Floor 2-3, Borommaratchachonnani Road, Chimplee Sub-district, Taling Chan District, Bangkok 10170
Telephone 0-2446-5666 Fax. 0-2446-5615
Contact Service Department Tel. 0-2446-5666
AVAILABLE DELIVERY OPTIONS
Free delivery Click Here
We stand by our commitment to provide you the best and fastest delivery service in Thailand, but
we need to inform that you may experience delays due to curfew and high volumes.
Track your order
To check your order status Click Here
Free Gift Wrapping Minimum 499.-
- Product must be worth more than 200.- / 1 wrapping
- Product size to gift wrapping service must be no larger than 38x43x33 cm. and weight not exceeding 5 kg.
Your order can be returned within 14 days from the
date the item(s) is received.
If you have received the wrong item(s) in your order
or have received defective/ broken item(s) in your
order or if your order is missing during
delivery,
new item(s) will be delivered to you free of charge
within 7 working days upon the date faulty item(s)
reached Central Online.
For more information or return condition
Click Here
How to return you order. Click Here
dyson airblade wash&dry
WD04 Short
TECHNICAL SPECIFICATION
Basin specification
The Dyson Airblade Wash+Dry hand dryer is compatible with most
basin types. Ensure plugs are not installed in the basins and avoid
inserts with embedded plugs (e.g. ones that swivel or elevate).
Using a specially designed test method, Dyson engineers evaluated
the user experience of a wide range of basin types when used with
the Dyson Airblade Wash+Dry hand dryer. For further details on our
recommended basins, please see the guide on our website dyson.com/docs
We recommend avoiding basins with the following geometric characteristics;
Flat bases immediately surrounding the drain hole.
(nominally within a 60 mm radius).
Sloping back and front wall transitions in relation to the base of the basin.
See our pre-installation guide for further details: dyson.com/docs
Basin dimensions:
All basin measurements are internal unless stated otherwise.
Minimum width of basin: 350 mm, Front to back-Minimum: 300 mm
Minimum depth of basin: 100 mm
Basin materials: Basins with highly polished surfoces should be avoided,
e.g. reflective chrome. Porcelain or brushed metal is ideal. When multiple taps
are installed side-by-side, tap centres should be a minimum
of 580 mm apart.
Standard warranty
5 year parts, 5 year labour.
Electrical
Input voltage/Frequency: 200-240V 50-60Hz
Motor specification: 1 000W digital brush less motor
Operating temperature range: 0°-40° C, 32°- 104°F
Heater type: None
Standby power consumption: Less than 0.5 W
Construction
Tap construction: Stainless steel (brushed)
Under counter motor assembly construction: Moulded ABS (main unit)
Exterior screw type: Torx Tl 5
Water ingress protection to IP35
Filter
HEPA filter (glass fibre and fleece prelayer)
Captures 99.95% of particles the size of
bacteria (0.1 microns) from the washroom air1
Operation
Touch-free infra-red activation
Hand dry time measurement: 14 seconds2
Operation lock-out period: 30 seconds
Airspeed at apertures: 341 mph/549 km/h
Maximum altitude: 2,000 metres / 6,562 ft.
Water operation
Water flow rate: 1.9 I/min normal fitted aerator.
4 I/min with low flow aerator supplied with product.
Water temperature control: Thermostatic mixer recommended (not supplied)
Water pressure required: 1-8 bar
Equipped with automatic duty flush -
every 24 hours for 60 seconds after the last use.
Logistics
Net weight: WD04 4.26 kg; WD06 9.51 kg
Packaged weight: WD04 6.76 kg; WD06 13.65 kg
Packaged dimensions: WD04 H303 X W284 X D291 mm
WD06 H610 x W375 x D302 mm
FLOOR
Tap dimensions
WD04 Height 159 mm Width 303 mm Depth 286 mm
Motor bucket dimensions
WD04 Height 266 mm Width 142 mm Depth 189 mm
Minimum clearance
Z 100 mm clearance fram floor
Warranty conditions
- The company guarantees the product for a period of 5 year from the date of purchase or delivery date.
- The product warranty covers only product problems caused by manufacturing.
- Product repair service center
Sangchai Air Quality Co., Ltd.
No. 88 Building B, Floor 2-3, Borommaratchachonnani Road, Chimplee Sub-district, Taling Chan District, Bangkok 10170
Telephone 0-2446-5666 Fax. 0-2446-5615
Contact Service Department Tel. 0-2446-5666
AVAILABLE DELIVERY OPTIONS
Free delivery Click Here
We stand by our commitment to provide you the best and fastest delivery service in Thailand, but
we need to inform that you may experience delays due to curfew and high volumes.
Track your order
To check your order status Click Here
Free Gift Wrapping Minimum 499.-
- Product must be worth more than 200.- / 1 wrapping
- Product size to gift wrapping service must be no larger than 38x43x33 cm. and weight not exceeding 5 kg.
Your order can be returned within 14 days from the
date the item(s) is received.
If you have received the wrong item(s) in your order
or have received defective/ broken item(s) in your
order or if your order is missing during
delivery,
new item(s) will be delivered to you free of charge
within 7 working days upon the date faulty item(s)
reached Central Online.
For more information or return condition
Click Here
How to return you order. Click Here
CUSTOMER REVIEWS
No location found