Masterkool Air purifier pm2.5 Model AP01 (MTK-AP-01)

Product introduction
This air purifier can effectively remove indoor air pollutants, which is applicable to the places with heavy concentrations of particles and odors, such as homes, schools, offices and other inhabited areas. It will assist in reducing your exposure to health and respiratory conditions.

Air quality sensor
Air quality sensor is mainly used to sense various air pollution gases. Induction gas type: ammonia, alcohol and other organic volatile gas, combustion smoke, lampblack and other gases, sometimes can sense steam and rapid air flow and temperature changes.

Before starting the air purifier
Power on
Place the air purifier on a horizontal support surface and then plug it into power socket;
1. Before plugging in, please make sure that your hand and plug is dry. If your hand or plug is wet, please wipe then plug into the power socker;
2. After plugging it in, the light on the top panel will flicker for one time with a "Beeping" sound

Product specification
specification
Product name : Air purifier
Rated voltage : 220 V/50 Hz
Rated Power : 40W
CADR : 180mg / h
Product size : 33 x 20 x 46cm
Product net weight : 4.2kg
Applicable area : 20m

How to use
POWER
1. After the power supply is connected, the screen lights up, the machine buzzes, and then enters the standby state;
2. Press the "on/off" button to start the machine, and the default mode is automatic when starting the machine. The air quality light flashes for 60 seconds, indicating that the sensor is in the preheating state.
3. In the startup state, press the "on/off" button again, and the machine will enter the standby state.

MODE
1. In the startup state, touch the "mode" button to switch the current mode, which can be divided into: manual mode, automatic mode, sleep mode;
2. Manual mode: the machine's wind speed is fixed, and the user can adjust the wind speed according to the demand.
3. Auto mode: the machine's wind speed automatically adjusts the wind speed according to the feedback data of the sensor. When the air quality is good, the wind speed is in the 1st gear, when the air quality is slightly polluted, the wind speed is in the 2nd gear, and when the air quality is poor, the wind speed is in the 3rd gear.
4. Sleep mode: except the sleep indicator, all the others are off, and the machine is running at low wind speed.

MANUAL MODE
In the startup state, touch the "wind speed" button and the machine will enter the state of manually adjusting the wind speed. The user can adjust the wind speed according to needs, and switch the wind speed before the first, second and third gears.

TIMER
1. In the startup state, touch the "timing" button, and it can be set to shut down regularly for 1-8 hours.
2. Cancel timing: long press "timing" button for 3 seconds to cancel the current timing setting at any time.

MODE+TIMER
1. When the filter life is over, the screen filter replacement indicator flashes, prompting the user to replace the filter;
2. Switch off the power and open the front panel to replace the filter. Please refer to the maintenance instructions for replacement and the installation instructions for the filter to prepare for starting up. After the filter is replaced, reconnect the power supply. In any mode, long press the "mode key" + "timing key" button for 5 seconds, the filter replacement indicator is off, and the filter is reset.

CHILD LOCK
In the startup state, long press the "child lock" button for 3 seconds to turn on/off the child lock function. After the child lock function is turned on, touching other keys is invalid.

ANION FUNCTION
In the startup state, press the "negative ion" button to start/turn off the negative ion function.

AVAILABLE DELIVERY OPTIONS